Master / National Distributor for Helicoil Brand Products.

  • sales@noblefix.com
  • +91-9901522733

AS 9120 Certified company

Helicoil Oversize Inserts Taps and Kits

FOR CORRECTING TAPPING ERRORS AND RESTORING CREW THREAD INSERT TAPPED HOLES   DESCRIPTION Helicoil Oversize Inserts are Heli-Coil Inserts with a larger wire cross section. WHEN TO USE Helicoil Oversize Inserts are used to correct the tapping errors that cause STI* assemblies to gage oversize. They can also be used to correct conditions of slight taper and bell-mouth in STI tapped holes. SIZES AVAILABLE Oversize Insert Kits and components come in inch sizes UNC and UNF, and Metric sizes as shown in the following tables. When Oversize Helicoil Inserts are installed, the original internal thread size is re-established allowing installation of the original size bolt. The columns on the right of Tables A & C indicate the effective correction to the pitch diameter of oversize tapped holes. KIT CONTENTS Each kit contains the quantity of 1-1/2 diameter inserts indicated in Tables A and C and a special oversize bottoming tap. For identification, the tang and bottom coil are dyed yellow on all Oversize Inserts. HOW TO INSTALL
  1. Retap the oversize hole with the special bottoming tap furnished in the kit. No Redrilling is necessary. For critical applications, refer to
the tapping and gaging procedure listed in the Engineering Data and Trouble Shooting section.
  1. Install the insert to the proper depth below the top surface (1/4 to 1/2 pitch for tapped holes without a countersink and 1 to 1-1/2 pitch
for holes with a countersink). Use the same tool recommended for a standard Heli-Coil Insert of the same size.
  1. If the assembly is still oversize, it will be necessary to resort to a Twinsert Repair Kit as shown on pages 6 & 7. Note – a standard gage
can be used to check an installed free-running Oversize Insert assembly provided the insert is fully seated.
  1. When assembly is satisfactory, remove the tang with the tang break-off tool recommended for the original insert.
*Screw  
Helicoil Oversize Inserts Taps and Kits

Related Products

Related products

Noble Aerospace Private Limited is a professionally managed company offering a qualitative assortment of advance Fastening Systems & Cutting Tool technology products. 

Whatsapp

Quick links

address

  • Noble Aerospace Private Limited 3B-32, 3rd Floor, 3rd Block, MS Industrial Complex, 488B, 14th Cross Road, 4th Phase, Peenya Industrial Area, Peenya, Bangalore 560058 INDIA

Contact us